Home :: KOHLER :: KOHLER Vertical Crankshaft Engines :: ALL Vertical Twin Cylinder Engines :: 25.0 Gross HP - KOHLER PS-EZT740-3014 EFI engine

25.0 Gross HP - KOHLER PS-EZT740-3014 EFI engine

25.0 Gross HP - KOHLER PS-EZT740-3014 EFI engine
SKU
PS-EZT740-3014

Free Shipping to 47 contiguous states!!!
Our price:
$2485.95
Qty
CID: 608
MANUFACTURER WARRANTY Consumer or Residential use Commercial or Rental use
3 Years

3 Years

DESCRIPTION:
  • This engine will replace the following EZT740 engines:
    EZT740-3011
    EZT740-3019
    EZT740-3021
    EZT740-3022
    EZT740-3023
    EZT740-3024

  • This engine will also replace the following EZT715 and EZT725 engines if you want to upgrade to more HP engine for your mower :
    EZT715-3000
    EZT715-3001
    EZT725-3000
    EZT725-3001

  • This engine will also replace the following EZT750 engines if you don't mind 2 HP less (same 747 cc though)
    EZT750-3002
    EZT750-3011
    EZT750-3014
    EZT750-3015
    EZT750-3018
    EZT750-3020
    EZT750-3021
    EZT750-3023
    EZT750-3024
    EZT750-3025
    EZT750-3026
    Your old engine must have the same crankshaft size as the new replacement engine. PLEASE contact us with your engine MODEL and TYPE numbers if you are not sure about your engine's crankshaft size. You can always measure the crankshaft size.

  • KOHLER PRO Grade Confidant™ featuring CYCLONIC AIR FILTER Engine
  • Lastest design includes built-in cyclonic air filter. GREAT!
  • EFI
  • 747cc
  • Vertical Shaft
  • Cast Iron Cylinder sleeve
  • OVERHEAD VALVE DESIGN (O.H.V.) design
  • Photo Actual Engine
  • Twin Cylinder
  • 12 volt electric start
  • 12 AMP alternator
  • Has fuel pump
  • PRO Oil filter
  • 1" diameter x 3-5/32" length keyed VERTICAL (UP and DOWN | ) crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.
  • Crankshaft Drilled and tapped 7/16-20
  • Electronic Fuel Injected. This engine does not have Carburetor, it does have fuel injector
  • Kohler Oil Sentry
  • Heavy Duty Cyclonic Air Filter
  • Solenoid Carburetor Shutdown
  • No gas tank
  • No muffler
  • Photo Actual Engine

  • Tap/thread 4 mounting holes the same thread size as your old mounting bolts so that you can reuse them. NOTICE: 4 mounting holes are not tapped by the manufacturer (no thread inside the mounting holes). CLICK HERE TO ORDER TAPPING SERVICE



    VERY IMPORTANT (PLEASE READ BEFORE PURCHASING):
    This is a great replacement engine for: SEARS, JOHN DEERE, SNAPPER, HUSQVARNA, MTD, AYP, AND MANY OTHERS With the same vertical crankshaft and mounting pattern, and dimensions. If your engine looks similar to this, has same 1" diameter x 3-5/32" length keyed VERTICAL crankshaft and you don't care about the HP or Gross Torque difference, you can use this engine. Please make sure your engine has the same crankshaft size. Otherwise, it will not work.

    GREAT replacement for zero turn mowers too.(check demensions and all other specification)

    Warranty from Kohler: 3 years for consumer/residential use or 2 years for commercial use.

    Order exhaust gasket here

    PLEASE BUY couple of oil filters for your next oil changes - Click Here.


    CLICK HERE FOR PS-EZT740-3014 DETAILED PICTURES
    •