Briggs and Stratton Snow Engines

OHV

250CC

11.5 Gross Torque

1150 Snow Series

Photo ACTUAL Engine

Recoil & 230 Volt Electric Starter

Alternator (60 Watt AC)

3/4” Dia. x 2.434” Keyed Crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Drilled/Tapped 3/8-24

Engine will run at Fixed Speed 3600 +/- 100 RPM. No adjustable throttle.

CH Red Fuel Cap.

Manual Choke

Primer

Push/Pull Keyswitch

Square Lo-Tone Muffler w/Wire Muffler Guard.

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)
CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

Horizontal Shaft

13.5 Gross Torque

1350 Snow Series

305CC

Bolt-on Recoil & 110 Volt Electric Start

Alternator (60 watt AC)

3/4” Dia. x 2.515” Keyed Crankshaft, make sure your engine has same crankshaft size

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

fixed Speed 3600 +/- 100 RPM

Primer

Push/Pull Keyswitch

Manual Stop

Square Lo-Tone Muffler w/stamped muffler guard.

Photo Actual Engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

Photo actual engine

Horizontal Shaft

OVERHEAD VALVE DESIGN (O.H.V.) design

305CC

14.5 Gross Torque

1450 Snow Series

Recoil and 230 Volt Electric starter included

Alternator (60 WATT AC)

Crankshaft size: 3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Fixed Speed 3600+/- 100 RPM

Manual Choke

Primer

Push/Pull Keyswitch

Super Lo-Tone Muffler W/Wire Muffler Guard

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

Can Replace John Deere 928E 20M114-0139-E1, 20M114-0133-E1, 1028E 1695808 20M314-0138-F1 20M314-0119-F1

14.5 Gross Torque

305CC

1450 Snow Series

OVERHEAD VALVE DESIGN (O.H.V.) design

Horizontal Shaft

Recoil & 110 Volt Electric Start

Alternator (9 Amp)

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Fixed Speed 3600 +/- 100 RPM

Primer

PUSH/PULL Keyswitch

Super Lo-Tone Muffler

Super Lo-Tone Muffler w/STAMPED Muffler Guard.

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

This engine is compatible to replace 20E114-0695-E1 on one of the Craftsman snowblowers 917.881050, 917.881051, 917.881052, or 917.881053 (917881050, 917881051, 917881052, or 917881053)

14.5 Gross Torque

305CC

1450 Snow Series

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft drilled/tapped 5/16-24 at the end of the shaft

OVERHEAD VALVE DESIGN (O.H.V.) design

Recoil (pull) Starter

Has 110V Electric starter

1.5 amp Alternator (see the wire plug by the starter also)

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE DETAILED PICTURES

This engine will replace:
JOHN DEERE 928E 20M114-0139-E1, 20M114-0133-E1, 1028E 1695808 20M314-0138-F1 20M314-0119-F1 perfectly or any other snow blower that has the same crankshaft size and the following description above.

- SIMPLICITY
   Simplicity L1428E (1695662) 20M314-0132-E1
   Simplicity L1528E (1695822) 20M314-0130-E1 or 20M214-0132-E1
   Simplicity 1060E (1694590 1694440) 20G414-0111-E1
   Simplicity 1170E , 1280E ( 1694441 , 1694591 ) 20G414-0111-E1
   Simplicity 1280E ( 1694592 , 1694442) 20G414-0111-E1
   Simplicity 9247E - 1694602
   Simplicity 9560E ( 1694589 1694867 ) 20G414-0111-E1
   Simplicity 1390E (1694593) 20G414-0111-E1
   Simplicity L1630E (1695663) 20M214-0132-E1
   Simplicity P1628E - 1695305 20E214-0119-E1
   Simplicity P1332E - 1695078 24" Model - Had Engine 20E214-0110-E1 installed
   Simplicity P1738E - 1695668 - had 20M414-0122-E1 installed
   Simplicity P1738E -1695668 - had 20M314-0130-E1 installed
   Simplicity P1732E - 1695307 - had 20E214-0119-E1 engine installed

SNAPPER
- Snapper 11327 11327E (1694604) 20G414-0111-E1
- Snapper 9247E - 1694602 - 20G414-0111-G1
- Snapper 9247E - 1694602 -20G416-0110-E1
- Snapper 10287E - 1694603 - 20G414-0111-G1
- Snapper 10287E - 1694603 - 20G416-0110-E1
- Snapper 12387E - 1694605 - 20G414-0111-G1
- Snapper 12387E - 1694605 -20G416-0110-E1
- Snapper M1429E - 1695735 - 20M114-0140-E1
- Snapper M1529E (1695909) - 20M314-0132-E1

14.5 Gross Torque

Horizontal Shaft

1450 PROFESSIONAL Series

OVERHEAD VALVE DESIGN (O.H.V.) design

305CC

Bolt-on Recoil & 110 Volt Electric Start

Alternator (9 Amp)

3/4" Dia. x 2.515"Keyed Crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size OR CALL US.

Crankshaft Drilled/Tapped 3/8 - 24

Has Manual Choke

Has Primer

Has Manual Stop

Has Super Lo-TOne Muffler w/ Stamped Muffler Guard.

Not for sale in California

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

ON SALE
Was: $765.95
NOW: $665.95

14.5 Gross Torque

1450 Platinum Snow Series

305CC

Endurance Series

HORIZONTAL SHAFT

OVERHEAD VALVE DESIGN (O.H.V.) design

305CC

Recoil & 110 Volt Electric Start

Alternator (60 Watt AC Only)

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Fuel Fresh Cap

Manual Choke

Push/Pull Keyswitch

Primer

Manual Stop

Super Lo-Tone Muffler W/Stampled Muffler Guard.

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

THIS ENGINE IS NO LONGER MADE OR AVAILABLE. IT WAS SUPERSEDED BY 19J1370008F1 1450 SERIES. The shaft height (measured from mounting surface to the center of the shaft) is about 5".
Click here to order it https://engine4less.com/19J1370008F1.html. --------------------------------------------------------------------------------------------

Your old engine must have the same crankshaft size as the new replacement engine. PLEASE contact us with your engine MODEL and TYPE numbers if you are not sure about your engine's crankshaft size. You can always measure the crankshaft size.

Briggs & Stratton SNOW Blower ENGINE

1650 SNow Series

16.5 Gross Torque

342CC

OHV

HORIZONTAL SHAFT

Bolt-on Recoil & 110 Volt Electric Start

Alternator 1.5 amp

1" diameter x 2.765" length keyed crankshaft

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Has Primer

Has Rotary On/Off Keyswitch

Has Super Lo-Tone Muffler w/Stampled Muffler Guard

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES

16.50 Gross Torque

1650 Snow Series

OVERHEAD VALVE DESIGN (O.H.V.) design

342CC

Recoil & 110 Volt Electric Start

Alternator (60 Watt AC)

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Fixed Speed 3600 +/- 100 RPM

Manual Choke

Has Primer

Has Push/Pull Keyswitch

Super Lo-Tone Muffler w/Stamped Muffler Guard

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES