25D137-0002-F1 Simplicity H 1728 E 1696921-00 25D1370002F1

    GENERAL DISCLAIMER - PLEASE READ! The following engines on this page have some similar specifications as your SIMPLICITY H 1728 E's engine.

Although any of these engines may not be exactly (100%) the same as for your SIMPLICITY H 1728 E's engine , we feel very confident and are doing our best from our many years of experience to show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations.

Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc.

Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help!
OUR POSSIBLE REPLACEMENT ENGINES FOR

SIMPLICITY SNOW BLOWER H1728E (1696921-00) with: Engine/Model: BRIGGS & STRATTON
25D137-0002-F1
( 25D137-0002 or 25D1370002 or 25D1370002F1 )


Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
    1. Bolt pattern - The mounting hole pattern are the same.
    2. The dimmension.
    3. Although spent a lot of time to carefully study about your engine, prepare, review, and compose this page to believe that your engine crankshaft size is 3/4" diameter x about 2.50" length, it is still your responsibility to measure your engine crankshaft to double check if it is the same.

Other minor things that you may have to do when you buy our engine to replace your engine including but not limited to: transfer your electric starter, alternator, wire harness from your old engine to the new one if it is not the same, tap/thread the mounting holes and etc..

YOUR EQUIPMENT BRAND & MODEL#
YOUR ENGINE BRAND, MODEL, SPEC/TYPE #
OUR POSSIBLE REPLACEMENT ENGINES
(If you matched your snow blower information on the left, buy one of the following engines )
SIMPLICITY Snow Blower
H 1728 E
(H1728E)

Make sure your snow blower model is:
H 1728 E

AND Your snow blower part number is: 1696921-00

AND your engine MODEL and TYPE number as:
25D137-0002-F1
Make sure your snow blower has ALL of the following information or CALL us!
BRIGGS & AND STRATTON  420cc ENGINE

25D137-0002-F1
( 25D137-0002 or 25D1370002 or 25D1370002F1 )


Your engine alternator is: 9 AMP DC

WARNING: Your snow blower may have a electric chute control. If this is correct you should buy a 9 AMP DC alternator engine to hook up and use your snow blower's electric chute, headlight and/or hand warmer (heated hand grips).

If you buy a different alternator engine (that does not have 9 AMP DC alternator) you will have to transfer your old engine's 9 AMP alternator to the new engine in order to use all other features (electric chute control, headlight, hand warmer) on your snow blower.

If the 1st engine OPTION is not available here or if you want to buy a more powerful engine, you can pick one of the engine in the 2nd OPTION list with different alternator and you MUST transfer your old engine's 9 AMP DC alternator to the new engine in order to use your snow blower's electric chute control, headlight, and/or hand warmer (heated grips) . 		BS_S_25_34250