12D114-0126-E8 John Deere 726E 1695620 12D1140126E8

    GENERAL DISCLAIMER - PLEASE READ! The following engines on this page have some similar specifications as your JOHN DEERE 726E's engine.

Although any of these engines may not be exactly (100%) the same as for your JOHN DEERE 726E's engine , we feel very confident and are doing our best from our many years of experience to show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations.

Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc.

Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help!
OUR POSSIBLE REPLACEMENT ENGINES FOR

JOHN DEERE SNOW BLOWER 726E (1695620) with: Engine/Model: BRIGGS & STRATTON
12D114-0126-E8
( 12D114-0126 or 12D1140126 or 12D1140126E8 )


Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
    1. Bolt pattern - The mounting hole pattern are the same.
    2. The dimmension.
    3. Although spent a lot of time to carefully study about your engine, prepare, review, and compose this page to believe that your engine crankshaft size is 3/4 diameter x about 2.43 length, it is still your responsibility to measure your engine crankshaft to double check if it is the same.

Other minor things that you may have to do when you buy our engine to replace your engine including but not limited to: transfer your electric starter, alternator, wire harness from your old engine to the new one if it is not the same, tap/thread the mounting holes and etc..

YOUR EQUIPMENT BRAND & MODEL#
YOUR ENGINE BRAND, MODEL, SPEC/TYPE #
OUR POSSIBLE REPLACEMENT ENGINES
(If you matched your snow blower information on the left, buy one of the following engines )
JOHN DEERE Snow Blower
726E
Make sure your snow blower has ALL of the following information or CALL us!
BRIGGS & AND STRATTON  205cc ENGINE

12D114-0126-E8
( 12D114-0126 or 12D1140126 or 12D1140126E8 )


Your engine alternator is: 1.5 AMP DC

If your snow blower does not have (all 3 of): electric chute control, headlight and heated hand grips (PLEASE double check your snow blower to make sure) you can buy any engine on this page to replace your engine regardless of the alternator output. 		BRIGGS AND STRATTON SNOW ENGINES.

As always, if in doubt or the information here is not correct, please contact us FIRST. Your current engine on your snow blower may looks similar to one of the Reference Pictures below. reference picture

If you believe more or less Horse Power (HP) CC or Gross Torque than your current engine will be fine with your snow blower, you can buy any of the engine in this box. Please choose HP, CC, and Gross Torque and engine choke style accordingly.
Reference PicturesAvailable engines
reference picture
click to buy
9 AMP DC alternator. 230 Volt Electric Starter

205 cc, 12D107-0167

CLICK TO BUY $479.95   FREE SHIPPING.

IMPORTANT Notice: Our engine has a 230 volt electric starter. You may be albe to transfer your old engine's 110 volt electric starter over to this new engine. Please contact us to buy a 110 volt electric starter if your old engine's 110 volt electric starter does not fit this new engine.