CV740-3135 Toro Z Master G3 (001) 74915 Cv7403135

    GENERAL DISCLAIMER - PLEASE READ! The following engines on this page have some similar specifications as your TORO Z MASTER G3's engine.

Although any of these engines may not be exactly (100%) the same as for your TORO Z MASTER G3's engine , we feel very confident and are doing our best from our many years of experience to show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations.

Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc.

Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help!
OUR POSSIBLE REPLACEMENT ENGINES FOR

TORO Z MASTER G3 with: Model# 74915 and KOHLER COMMAND
CV740S-3135 or CV740-3135

CV740S3135 or CV7403135
PA-CV740S-3135 or PA-CV740-3135
PACV740S-3135 or PACV740-3135
PACV740S3135 or PACV7403135

PS-CV740S-3135 or PS-CV740-3135
PSCV740S-3135 or PSCV740-3135
PSCV740S3135 or PSCV7403135


Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
    1. Bolt pattern - The mounting hole pattern are the same.
    2. The dimmension.
    3. Muffler configuration is the same (you can reuse your old muffler)
    4. Although spent a lot of time to carefully study about your engine, prepare, review, and compose this page to believe that your engine crankshaft size is 1-1/8" diameter x 4-5/16" length, it is still your responsibility to measure your engine crankshaft to double check if it is the same.

Other minor things that you may have to do when you buy the long block to replace your engine including but not limited to: transfer your wire harness from your old engine to the new one if it is not the same (most of these have similar wire harness though), tap/thread the mounting holes (as most of brand new engines did not have the mounting holes threaded/tapped by the manufacturer) etc..

YOUR EQUIPMENT BRAND & MODEL#
YOUR ENGINE BRAND, MODEL, SPEC/TYPE #
OUR POSSIBLE REPLACEMENT ENGINES
(If you matched your equipment's information on the left, buy one of the following engines )
TORO

Z MASTER G3

( 74915 )
Make sure your mower has ALL of the following information or CALL us!
KOHLER COMMAND 25 HP 725cc ENGINE

CV740S-3135 or CV740-3135

CV740S3135 or CV7403135
PA-CV740S-3135 or PA-CV740-3135
PACV740S-3135 or PACV740-3135
PACV740S3135 or PACV7403135

PS-CV740S-3135 or PS-CV740-3135
PSCV740S-3135 or PSCV740-3135
PSCV740S3135 or PSCV7403135

and this MODEL# may be found under the mower's seat:

74915
CONTACT US - PLEASE CALL/TEXT US:phone number for a replacement engine.

When you contact us, please give us your engine MODEL and TYPE, SPEC, or CODE number and your lawn mower or equipment model numbers.

Call: Normal Office Hours
Text: 24 Hours (any time)

If you can't call us, Please click here to request us to call you or send us your message.