CV730-0022 Snapper NZMJ23523KH 7800024 Cv7300022

    GENERAL DISCLAIMER - PLEASE READ! The following engines on this page have some similar specifications as your SNAPPER NZMJ23523KH's engine.

Although any of these engines may not be exactly (100%) the same as for your SNAPPER NZMJ23523KH's engine , we feel very confident and are doing our best from our many years of experience to show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations.

Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc.

Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help!
OUR POSSIBLE REPLACEMENT ENGINES FOR

SNAPPER NZMJ23523KH with: P/N 7800024 and KOHLER COMMAND
CV730S-0022 or CV730-0022

CV730S0022 or CV7300022
PA-CV730S-0022 or PA-CV730-0022
PACV730S-0022 or PACV730-0022
PACV730S0022 or PACV7300022

PS-CV730S-0022 or PS-CV730-0022
PSCV730S-0022 or PSCV730-0022
PSCV730S0022 or PSCV7300022


Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
    1. Bolt pattern - The mounting hole pattern are the same.
    2. The dimmension.
    3. Muffler configuration is the same (you can reuse your old muffler)
    4. Although spent a lot of time to carefully study about your engine, prepare, review, and compose this page to believe that your engine crankshaft size is 1" diameter x 3 5/32" length, it is still your responsibility to measure your engine crankshaft to double check if it is the same.

Other minor things that you may have to do when you buy the long block to replace your engine including but not limited to: transfer your wire harness from your old engine to the new one if it is not the same (most of these have similar wire harness though), tap/thread the mounting holes (as most of brand new engines did not have the mounting holes threaded/tapped by the manufacturer) etc..

YOUR EQUIPMENT BRAND & MODEL#
YOUR ENGINE BRAND, MODEL, SPEC/TYPE #
OUR POSSIBLE REPLACEMENT ENGINES
(If you matched your equipment's information on the left, buy one of the following engines )
SNAPPER

NZMJ23523KH

( 7800024 )
Make sure your mower has ALL of the following information or CALL us!
KOHLER COMMAND 23 HP 725cc ENGINE

CV730S-0022 or CV730-0022

CV730S0022 or CV7300022
PA-CV730S-0022 or PA-CV730-0022
PACV730S-0022 or PACV730-0022
PACV730S0022 or PACV7300022

PS-CV730S-0022 or PS-CV730-0022
PSCV730S-0022 or PSCV730-0022
PSCV730S0022 or PSCV7300022

and this NUMBER may be found on the mower:

7800024
CONTACT US - PLEASE CALL/TEXT US:phone number for a replacement engine.

When you contact us, please give us your engine MODEL and TYPE, SPEC, or CODE number and your lawn mower or equipment model numbers.

Call: Normal Office Hours
Text: 24 Hours (any time)

If you can't call us, Please click here to request us to call you or send us your message.