CV740-0006 Husqvarna LZ 6127 LZ6127 Cv7400006

    GENERAL DISCLAIMER - PLEASE READ! The following engines on this page have some similar specifications as your HUSQVARNA LZ 6127's engine.

Although any of these engines may not be exactly (100%) the same as for your HUSQVARNA LZ 6127's engine , we feel very confident and are doing our best from our many years of experience to show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations.

Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc.

Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help!
OUR POSSIBLE REPLACEMENT ENGINES FOR

HUSQVARNA LZ 6127 with: KOHLER COMMAND
CV740S-0006 or CV740-0006

CV740S0006 or CV7400006
PA-CV740S-0006 or PA-CV740-0006
PACV740S-0006 or PACV740-0006
PACV740S0006 or PACV7400006

PS-CV740S-0006 or PS-CV740-0006
PSCV740S-0006 or PSCV740-0006
PSCV740S0006 or PSCV7400006


Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
    1. Bolt pattern - The mounting hole pattern are the same.
    2. The dimmension.
    3. Muffler configuration is the same (you can reuse your old muffler)
    4. Although spent a lot of time to carefully study about your engine, prepare, review, and compose this page to believe that your engine crankshaft size is 1 1/8" diameter x 4 5/16" length, it is still your responsibility to measure your engine crankshaft to double check if it is the same.

Other minor things that you may have to do when you buy the long block to replace your engine including but not limited to: transfer your wire harness from your old engine to the new one if it is not the same (most of these have similar wire harness though), tap/thread the mounting holes (as most of brand new engines did not have the mounting holes threaded/tapped by the manufacturer) etc..

YOUR EQUIPMENT BRAND & MODEL#
YOUR ENGINE BRAND, MODEL, SPEC/TYPE #
OUR POSSIBLE REPLACEMENT ENGINES
(If you matched your equipment's information on the left, buy one of the following engines )
HUSQVARNA

LZ6127
(LZ 6127)
Make sure your mower has ALL of the following information or CALL us!
KOHLER COMMAND 27 HP 725cc ENGINE

CV740S-0006 or CV740-0006

CV740S0006 or CV7400006
PA-CV740S-0006 or PA-CV740-0006
PACV740S-0006 or PACV740-0006
PACV740S0006 or PACV7400006

PS-CV740S-0006 or PS-CV740-0006
PSCV740S-0006 or PSCV740-0006
PSCV740S0006 or PSCV7400006






 KOHLER COMMAND TWIN CYLINDER ENGINE

As always, if in doubt or the information here is not correct, please contact us FIRST. Your current engine on your mower may looks similar to one of the Reference Pictures below. reference picture

If you believe more or less Horse Power (HP) CC or Gross Torque than your current engine will be fine with your mower, you can buy any of the engine in this box. Please choose HP, CC, and Gross Torque and engine choke style accordingly.
USE KOHLER 7000 SERIES ENGINE (KT715 to KT745) TO REPLACE KOHLER COMMAND ENGINE - PLEASE READ THE FOLLOWING...
When using a NEWER ENGINE (KOHLER 7000 SERIES of KT715 to KT745 ) to replace the OLDER ENGINE (Kohler Command Twin Cylinder Engine), you will have to the following minor tasks including, but not limited to:
  1. Transfer the electric starter from the OLDER ENGINE to the NEWER ENGINE because the electric starter on the NEWER ENGINE may not have a solenoid or install an external starter solenoid for the NEWER ENGINE . If the NEWER ENGINE's electric starter has built-in solenoid, you can skip this step.

  2. You will also have compare the NEWER ENGINE AND OLDER ENGINE's wire harness side by side to reconfigure the wires on the NEWER ENGINE to make sure they are all line up as the OLDER ENGINE.

  3. There may be some other minor modifications that you may have to do.

  4. The mounting hole patterns of the Kohler 7000 Series engine and Kohler Command engine are the same. You won't have to drill any mounting holes on your mower's deck. Just tap/thread the engine's mounting holes if they (most) are not tapped.

  5. We had customer(s) who did this and made it worked before.
KOHLER 7000 SERIES TWIN CYLINDER ENGINES
Reference PicturesAvailable engines