SV600-0225 PS-SV600-0225 PA-SV600-0225 Match Kohler engine.


As always, if in doubt or the information here is not correct, please contact us FIRST. Your current engine on your mower may looks similar to this picture. reference picture1
NO FUEL PUMP
SINGLE CYLINDER KOHLER COURAGE

POSSIBLE REPLACEMENT LONG BLOCK FOR

KOHLER COURAGE SINGLE CYLINDER SV600-0225 20.0 HP
NO FUEL PUMP ENGINE


If your engine SPEC number is either: SV600-0225 , SV600S-0225 SV600-0225 SV600S0225 or SV6000225 or PA-SV600S-0225 or PA-SV600-0225 or PASV600S-0225 or PASV600-0225 or PASV600S-0225 or PASV6000225 or PS-SV600-0225 or PS-SV600S-0225 or PSSV6000225 or PSSV600S0225 please read and understand the following NOTICE about replacing your engine with our long block.

NOTICE:
  • Your engine is no longer made by Kohler. We have a solution for you to repower your mower with this special KOHLER Courage long block. Replace any Kohler Courage single cylinder engine Model SV470 to SV620 regardless of HP

  • Buy this SPECIAL long block from us. Do not be mistaken this as some short block from our competitors' offering. If you buy a short block, you will have to transfer a lot of parts from your old engine and have a lot of work to do.

  • This long block will service any single cylinder Kohler Courage SV470 to SV620 engine, with either the gravity-fed or fuel pump configuration. This unique long block includes the complete electrical system and is set up for a gravity-fed fuel system.

    WHAT NEEDED FROM YOUR OLD ENGINE AND WHAT YOU NEED TO DO:
    1. This Single Cylinder Kohler Courage long block came with almost everything. You MUST still have your original engine and the following parts and their related parts:
          a. blowing house (top cover)
          b. carburetor with the attached carburetor's linkages
          c. muffler

    2. You will need to transfer your original engine's blower housing (cover) to the KOHLER Courage long block.

    3. You will need to transfer your original engine's muffler to the KOHLER Courage long block.

    4. Depending on your engine year of manufacture (serial number) you may be able to transfer the carburetor and all the linkages that are connected to the carburetor to the KOHLER Courage long block. If it does not work or you just need a brand new carburetor, you can purchase the correct Kohler Courage Single cylinder engine carburetor from us. Or contact us to get the right one.

    5. Tap/thread 4 mounting holes the same thread size as your old mounting bolts so that you can reuse them or Order Tapping Service Here
    WHAT WILL BE INCLUDED:
    • A BRAND NEW single cylinder Kohler Courage Long block
    • Electric fuel pump and fuel line (hose) and gaskets (If your old engine has a fuel pump, you will need to install this electric fuel pump. Otherwise, you won't have to.)
    • Fuel filter
    • Installation instructions for the long block and electric fuel pump.
    • You can contact us for free support after your purchase. Others may charge you a support fee for this.

    Other minor things that you may have to do when you buy the long block to replace your engine including but not limited to: transfer your wire harness from your old engine to the new one if it is not the same (most of these have similar wire harness though), tap/thread the mounting holes (as most of brand new engines did not have the mounting holes threaded/tapped by the manufacturer) etc..

  • Reference PicturesAvailable long block
    reference picture2 LONGBLOCK-2052301 , 597 cc    CLICK TO BUY $1195.0    FREE SHIPPING.

    Your engine is no longer made by Kohler. We have a solution for you to repower your mower with this special KOHLER Courage long block.

    If you still have your current engine, buy this special long block from us and transfer a few parts (blower housing cover, muffler and carburetor and its related parts..etc) from your current engine to it. Do not be mistaken this as the short block from our competitors' offering.

    If you buy a short block from someone else, you will have to transfer a lot of parts from your old engine and have a lot of work to do.
    CLICK HERE FOR MORE INFORMATION
    reference picture2 Click here to order tapping service: Tap 4 engine mounting holes to the size 3/8-16 NC   CLICK TO BUY    FREE SHIPPING.