Snow Blower Engine - 1450 Snow Series

This engine is compatible to replace 20E114-0695-E1 on one of the Craftsman snowblowers 917.881050, 917.881051, 917.881052, or 917.881053 (917881050, 917881051, 917881052, or 917881053)

14.5 Gross Torque

305CC

1450 Snow Series

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft drilled/tapped 5/16-24 at the end of the shaft

OVERHEAD VALVE DESIGN (O.H.V.) design

Recoil (pull) Starter

Has 110V Electric starter

1.5 amp Alternator (see the wire plug by the starter also)

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE DETAILED PICTURES

Can Replace John Deere 928E 20M114-0139-E1, 20M114-0133-E1, 1028E 1695808 20M314-0138-F1 20M314-0119-F1



This engine will replace:
JOHN DEERE 928E 20M114-0139-E1, 20M114-0133-E1, 1028E 1695808 20M314-0138-F1 20M314-0119-F1 perfectly or any other snow blower that has the same crankshaft size and the following description above.

- SIMPLICITY
   Simplicity L1428E (1695662) 20M314-0132-E1
   Simplicity L1528E (1695822) 20M314-0130-E1 or 20M214-0132-E1
   Simplicity 1060E (1694590 1694440) 20G414-0111-E1
   Simplicity 1170E , 1280E ( 1694441 , 1694591 ) 20G414-0111-E1
   Simplicity 1280E ( 1694592 , 1694442) 20G414-0111-E1
   Simplicity 9247E - 1694602
   Simplicity 9560E ( 1694589 1694867 ) 20G414-0111-E1
   Simplicity 1390E (1694593) 20G414-0111-E1
   Simplicity L1630E (1695663) 20M214-0132-E1
   Simplicity P1628E - 1695305 20E214-0119-E1
   Simplicity P1332E - 1695078 24" Model - Had Engine 20E214-0110-E1 installed
   Simplicity P1738E - 1695668 - had 20M414-0122-E1 installed
   Simplicity P1738E -1695668 - had 20M314-0130-E1 installed
   Simplicity P1732E - 1695307 - had 20E214-0119-E1 engine installed

SNAPPER
- Snapper 11327 11327E (1694604) 20G414-0111-E1
- Snapper 9247E - 1694602 - 20G414-0111-G1
- Snapper 9247E - 1694602 -20G416-0110-E1
- Snapper 10287E - 1694603 - 20G414-0111-G1
- Snapper 10287E - 1694603 - 20G416-0110-E1
- Snapper 12387E - 1694605 - 20G414-0111-G1
- Snapper 12387E - 1694605 -20G416-0110-E1
- Snapper M1429E - 1695735 - 20M114-0140-E1
- Snapper M1529E (1695909) - 20M314-0132-E1

14.5 Gross Torque

305CC

1450 Snow Series

OVERHEAD VALVE DESIGN (O.H.V.) design

Horizontal Shaft

Recoil & 110 Volt Electric Start

Alternator (9 Amp)

3/4" diameter x 2.515" length keyed crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.

Crankshaft Drilled/Tapped 3/8-24, ready for bolt

Fixed Speed 3600 +/- 100 RPM

Primer

PUSH/PULL Keyswitch

Super Lo-Tone Muffler

Super Lo-Tone Muffler w/STAMPED Muffler Guard.

Photo Actual engine

VERY IMPORTANT (CLICK ON THE ENGINE PICTURE FOR MORE INFO)

CLICK HERE FOR MORE REFERENCE OR DETAILED PICTURES