Home :: KOHLER :: KOHLER Vertical Crankshaft Engines :: ALL Vertical Twin Cylinder Engines :: 26.0 HP - Kohler PS-KT745-3043 engine

26.0 HP - Kohler PS-KT745-3043 engine

26.0 HP - Kohler PS-KT745-3043 engine
SKU
PS-KT745-3043

Free Shipping to 47 contiguous states!!!
Our price:
$2385.95
Qty
CID: 608
MANUFACTURER WARRANTY Consumer or Residential use Commercial or Rental use
3 Years

3 Years (Purchased After November 1, 2017)
or
2 Years (Purchased Prior to November 1, 2017)



DESCRIPTION:
Your old engine must have the same crankshaft size as the new replacement engine. PLEASE contact us with your engine MODEL and TYPE numbers if you are not sure about your engine's crankshaft size. You can always measure the crankshaft size.

DESCRIPTION

  • Kohler engine
  • Model # PSKT7453043
  • 26.0 HP
  • 7000 SERIES
  • 747CC
  • Vertical Crankshaft
  • Twin Cylinder
  • OVERHEAD VALVE DESIGN (O.H.V.) design
  • Cast Iron Cylinder Sleeve
  • 12 Volt Electric Start
  • 15 Amp Alternator
  • Crankshaft size: 1" dia. x 3-5/32" length keyed VERTICAL (UP and DOWN | ) crankshaft. PLEASE make sure you compare your engine crankshaft size with this Crankshaft size or call us.
  • Crankshaft Drilled/Tapped 7/16-20
  • Manual Choke
  • Oil Filter
  • Fuel Pump
  • Solenoid Carburetor Shutdown
  • NO Tank
  • NO Muffler
  • Photo Actual Engine
  • Rated at 3600 rpm per SAE J1940 Gross

  • Tap/thread 4 mounting holes the same thread size as your old mounting bolts so that you can reuse them. NOTICE: 4 mounting holes are not tapped by the manufacturer (no thread inside the mounting holes). CLICK HERE TO ORDER TAPPING SERVICE



    VERY IMPORTANT (PLEASE READ BEFORE PURCHASING):

    This is a great replacement engine for: SEARS, JOHN DEERE, SNAPPER, HUSQVARNA, MTD, AYP, AND MANY OTHERS With the same vertical crankshaft and mounting pattern, and dimensions. If your engine looks similar to this, has same 1" dia. x 3-5/32" length keyed crankshaft and you don't care about the HP or Gross Torque difference, you can use this engine. Please make sure your engine has the same crankshaft size. Otherwise, it will not work.

    This vertical crankshaft engine WILL NOT replace a Horizontal (side) crankshaft engine. Vertical Crankshaft Engine when mounted, the crankshaft will be on the bottom pointing down. If you are not sure about your engine crankshaft size, please call us. The replacement engine must have the same crankshaft size as your current engine.

    Order exhaust gasket here

    PLEASE BUY couple of oil filters for your next oil changes - Click Here.


    CLICK HERE FOR MORE DETAILED PICTURES
  •